How to calculate how much gravel you will need for your project

Calculating the total amount of material you will need for a project, can sometimes be overwhelming. To help provide you with an estimate, we have put together this quick guide detailing how to calculate how much gravel you will need for you project.  

The first step is to calculate the area of the section you would like to cover with gravel. The area calculation = A x B (Where A & B are 2 sides of a square or rectangular area).  

For example, if your driveway measures 4m wide (A) by 12m long (B) the total area you need to cover is 48 sqm. 

If you are looking to fill a driveway or path with gravel, we recommend the depth of the area should be 50mm thick as it will experience higher traffic. For covering planted areas, the depth only needs to be around 30mm thick.  

We sell our gravel in 25kg polybags and in Bulk Bags. Based on our 20mm sized stones, 1 bulk bag of gravel will cover approximately 12 sqm at 50mm depth for paths and driveways. Alternatively, 1 bulk bag will cover approximately 16 sqm at 30mm depth. Our 25kg Polybags will roughly cover 0.4sqm. 

Taking our earlier example into consideration, the total area needed to cover for the driveway was 48 sqm. Therefore, approximately 4 bulk bags would be required for 50mm depth. 

Please be aware that this information can only be given as a rough guide due to the differing sizes of gravels, as this will lead to a slightly different coverage.  

If you would like to purchase gravel, please see our full gravel range here >> 

Read more