Stoneworld exterior stone & interior stone plus masonry services, have enabled this homeowner to achieve the superior finish desired on this extensive self build project. Did you know we also do fantastic quality oak wood flooring? See it used here too.
In this project Stoneworld has been able to showcase so many areas of our expertise in getting what the customer wants out of stone. Using our masonry factory to cut and finish various stones to exactly the specification required by our customer.
Exterior Stone Ashlar Veneer
Here we have created a stone ashlar veneer in Moleanos limestone for the exterior front walls of the house. In the masonry factory the pieces have been cut to order with groove hanging strip.
Slate Paving at Entrance
Further landscaping outside can be seen at the front of the house where black slate paving has been used along the front and at the entrance to this magnificent home. This makes a great contrast against the Moleanos limestone ashlar, and the extensive gravelled driveway which is covered with buff mellow gravel.
For the driveway we were able to deliver in tip truck bulk quantities , which is the most cost effective way to receive large quantities of gravel for your driveway (ask for a quote today)
Limestone Paved Terrace
Around the rear of the property we have supplied Kota Blue Tumbled Limestone paving. The tumbling of the edges and surface of this paving gives a lovely timeworn appearance to the patio.
Take a look at the indoors projects that Stoneworld have been involved in on this great self build project !
Bespoke Stone Staircase
This magnificent staircase has been made in our masonry factory. Stoneworld use a digital templating system to record the necessary data from the site. This is then programmed into our water jet cutter, which precison cuts each piece of the staircase for a perfect fit. The staircase is made from La Roche Limestone in a brushed and honed finish. Note the bullnosed edges of the step treads, the matching risers, and the statement bottom step and riser. Here the elongated step tread has curved ends and curved end blocks on the riser.
The beautiful hallway floor has been made from La Roche limestone floor tiles in 900 x 600 format. However, in another part of the house a bespoke floor design has been created. Using La Roche again but with an accent tile incorporated into the design, made from Spanish Black Marble. The pattern has been achieved by water jet cutting every tile to the correct shape and size. i.e. each La Roche tile is 700 x 700 with corners cut off, and the Spanish marble tiles have been cut to 100 x 100
Adjoining the limestone floor there is an area of oak wood flooring. Did you know that Stoneworld do fantastic quality oak wood flooring? Here it has been laid in a parquet pattern in Natural Oiled format. The exceptional quality of this flooring can be seen from these pictures.
Ask us for a quote today, there are various formats, have a look at our oak flooring now>>
The last piece of the project so far is the fitting of several worktops, fabricated in our masonry factory.
Kitchen Worktops & Bathroom Vanity Worktops
We have fitted Lapitec surfaces to both the kitchen worktops and bathroom vanity worktops in Grigio Piombo.
Lapitec is a sintered stone. It is manufactured at very high temperatures to produce an exceedingly strong material. Stoneworld are approved Lapitec contractors, and have cut the worktops in our masonry factory. Lapitec is just one of the many worktop materials that Stoneworld supply and fit. Please visit our showroom at Great Milton to discover the range available to you in granite, quartz, and Lapitec.
Everything you need in stone
As you can see, Stoneworld has everything you need in stone! Speak to us today about your plans.
We are a dynamic team and very solution orientated. Our experience will enable you to achieve your design project in stone.
Thank you Mr T for allowing the use of these photos of your wonderful home to showcase our stone.