sales@stoneworld.co.uk
01844 279274
Setts, Pavers and Block Paving
Stoneworld supplies setts, pavers and block paving in a range of natural stone types for landscaping, access, driveway and civic applications across the UK. Standard formats are available alongside cut-to-size production for projects where layout, geometry or module sizing requires something beyond the off-the-shelf range. As with all exterior stone, the correct specification involves understanding not just the material itself but the installation system, trafficking conditions and long-term maintenance expectations.
Featured Products
Natural Stone Setts
Natural stone setts are small-format paving units, typically square or rectangular in plan, laid in coursed or fan patterns to create durable and visually distinctive hard surfaces. Granite setts are the most widely specified for driveways, access routes and civic applications because of their hardness and long-term resistance to heavy loading and freeze-thaw cycles. Sandstone setts offer a softer visual character and are often used in garden and residential settings where the slightly warmer tones of the stone are preferred.
When specifying natural stone setts, unit size, joint width, laying pattern and bedding system all need to be considered together. The visual result depends on the pattern being achievable within the geometry of the paved area, and the practical performance depends on the base design, bedding depth and jointing approach being matched to the loading conditions. For projects with drainage channels, kerb edges or radial sections, these elements should be coordinated with the sett layout from the outset rather than resolved on site.
Granite Setts
Granite setts are one of the most durable exterior paving materials available. Their density and hardness make them suitable for driveways, access routes, forecourts and any setting where the surface will be subjected to vehicle loading, point loads or prolonged heavy foot traffic. Granite also performs well in frost-prone settings because its low porosity limits water ingress and reduces the risk of surface delamination or spalling.
Stoneworld supplies granite setts in standard sizes and can advise on the appropriate format, laying pattern and bedding approach for the project conditions. Where a project includes matching kerb stones or edging details, these should be selected and dimensioned in relation to the sett size being used so the finished layout reads as a coordinated system.
Sandstone Setts and Pavers
Sandstone setts and pavers are commonly specified for residential garden settings, pedestrian paths and lower-trafficked access areas where the warmer tonal character of the material is preferred. Sandstone is softer than granite and requires more care in specification for heavily loaded applications, but in the right setting it provides an excellent combination of visual warmth and practical durability.
The finish and thickness of sandstone setts should reflect the intended use. For driveways, thicker formats and an appropriate bedding system are needed. For garden paths and patio edges, lighter formats may be suitable depending on the ground conditions and layout.
Setts are often most effective as part of a broader layout that includes contrasting or complementary paving zones, defined edges and considered transitions between materials. Where a project combines sett paving with natural stone slabs, steps or copings, the joint lines, module relationships and material transitions should be resolved at design stage so the finished scheme feels intentional. Stoneworld can supply both setts and the wider stone components within a project, which makes coordinating material, finish and sizing across the full scope more straightforward.
